Chips Packing Machine

+91-95 999 19 442 sales@munky.in

Chips Packing Machine

Chips packing machine must address the special characteristics of chips.

The size of the potato used decides the size of chips. After frying they tend to twist and entangle with each other when put in the hopper of the chips packing machine.

Further the chips are fragile and if not handled properly in the chips packaging machine they would break. Which necessitates that the chips packing machine must handle them gently so as to avoid any breakage in the packing process.

Pouches of chips are available from as low as 15gms to 250gms or more. Different nett weights should be able to be packed in the same chips wafer packing machine.

The change over from one weight setting to the other should be easy and it should be possible to form pouches of different sizes in the same chips packaging machine.

Both the manpower cost and the cost of raw materials is on a consistent increase as a result of which, it is necessary to have a chips packing solution that optimises both the material saving and manpower saving during the packing process, to keep up with the profitability levels.

If the nett weight that is packed in each pouch is less then the distributors and dealers raise a complaint. To overcome this issue manufacturers are forced to pack higher quantity per pouch, furthermore, if the upper level of the weight that is packed in the pouch is not controlled then it can affect the profitability adversely.

bgform

Connect with us for FREE Consultation or to Download Catalogue

Oops! We could not locate your form.

*This information will remain confidential.

Solution – Chips Packing Machine

We manufacture chips packing machines that fill on the basis of weight and packs the pouches automatically. The video given below gives a detailed description of the operation of the chips packaging machine.

The machine is capable of packing Multiple nett weights in the same machine. All weight settings are easily stored in the machine’s system memory that can be accessed by just a few clicks.

Different pouch sizes can be made by changing the forming chute or collar former. Nitrogen filling is a user selectable feature, even more it is programmable through the display panel.

The batch coding unit can print multiple lines on the pouch at designated locations. The standard machine includes a pneumatic coder however the ribbon coding comes as an added accessory, therefore, the user can print variable information like Nett Weight, MRP, Lot Code and date of manufacture. The number of pouches per strip is programmable through the display unit.

The number of weighing heads for the chips packaging machine can vary from one, two to four weighing heads. This gives the customer of selecting a machine that suits their speed and budget.

Owing to these reasons the volumetric fillers are losing ground to the weigh fillers in the long run. Consequently many manufacturers are discarding the volumetric fillers for granular items and opting for weigh fillers for chips packing.

The machine is available in various formats Single head weigher with bagger, two head weigher with bagger and four head weigher with bagger. This gives us different output speeds and different prices to suit all budget and automation levels.